亚洲精品永久观看不卡,日本小视频一区二区三区,国产精品久久久久9999不卡,精品国产av色一区二

1. 丁烷法固定床工藝：丁烷法固定床工藝主要由亨斯邁公司、BP、SD、 康斯?fàn)枺–onser）公司擁有，與苯氧化法基本相似，但正丁烷氧化轉化率和選擇性均比苯低，其順酐的摩爾收率按正丁烷計僅為 50％~55％，而原料氣體中苯和正丁烷的摩爾濃度基本相同。因此對于同樣規模的裝置，正丁烷法需要較大的反應器和壓縮機。反應溫度 400～450℃，壓力為 125～130 MPa。為了降低正丁烷的單耗，比利時的 Pantochim公司采用尾氣循環工藝，吸收塔頂出來的尾氣約50％經處理后與新鮮空氣一并進入反應器。該工藝可使正丁烷的單耗下降約 10％ 。

1. Butane fixed bed process: The butane fixed bed process is mainly owned by Huntsman, BP, SD, and Consol, which is similar to the benzene oxidation method, but the conversion rate and selectivity of n-butane oxidation are lower than benzene. The molar yield of maleic anhydride is only 50%~55% based on n-butane, while the molar concentrations of benzene and n-butane in the raw gas are basically the same. Therefore, for production facilities of the same scale, the n-butane method requires larger reactors and compressors. The reaction temperature is 400-450 ℃ and the pressure is 125-130 MPa. In order to reduce the unit consumption of n-butane, Pantochim Company in Belgium adopts a tail gas circulation process. About 50% of the tail gas from the top of the absorption tower is treated and enters the reactor together with fresh air. This process can reduce the unit consumption of n-butane by about 10%.

2.  丁烷法流化床工藝：流化床工藝是 Lummus 公司和 Lonza 公司合作開發的 ALMA 工藝。 流化床反應器中，正丁烷和空氣分別進入反應器后混合，避免了其混合時發生爆炸的可能 因此原料氣中正丁烷的摩爾分?jǐn)?shù)可以提高到 4％，反應所需空氣約為固定床的一半，減少了空氣壓縮機的投資和操作費用。流化床工藝的能耗低于固定床，但丁烷的單耗要比固定床高約 8％，另外流化床催化劑的磨損也較大。

2. Butane method fluidized bed process: The fluidized bed process is an ALMA process jointly developed by Lummus and Lonza companies. In a fluidized bed reactor, n-butane and air are mixed separately after entering the reactor, avoiding the possibility of explosion during mixing. Therefore, the molar fraction of n-butane in the feed gas can be increased to 4%, and the required air for the reaction is about half of that of a fixed bed, reducing the investment and operating costs of the air compressor. The energy consumption of fluidized bed technology is lower than that of fixed bed, but the unit consumption of butane is about 8% higher than that of fixed bed. In addition, the wear of fluidized bed catalysts is also significant.

本文由順酐廠家提供技術支持，更多的詳細精彩內容請點擊我們的網站http://www.x9mr1s.cn我們將會全心全意為您提供滿意的服務。

This article is supported by the manufacturer of maleic anhydride. For more detailed and exciting content, please click on our website http://www.x9mr1s.cn We will wholeheartedly provide you with satisfactory service.